Electrodepot
 

 

 

1 Channel Transmitter and Receiver

• 5 Miles ( 8 km ) line of sight, 
• 2000 feet (600m) inside partially obstructe

 Applications:
Lighting control, Tank level, irrigation, Well pump, gates, water management, process, packing, flow control, automatic wireless level control, security

   Transmitter & Receiver Kit
1  Base Transmitter Dry contact input  
1  Base Receiver pre-wired, With controller- timer
21 inch  Antenna with coaxial  cable & PL259 connector
NEMA 3X   metallic enclosure
Instruction & Wiring Diagram  Disclaimer

  937500  Kit   $1,399.99   Special order 

 SPECIFICATIONS
Operating Voltage: 12 to 15. VDC
Operating Temperature: -4° to +140° F (-20° to +60° C)
Receiver Type: 16 BIT Digital -118 dB 
Carrier Frequency 27 MHz 
Number of Codes: DIP switch programming
Current Drain Receiver  25 mA, standby, 65 mA operation
Data Input TX  Dry contact 
Relay Output 10 Amp max  250VAC N/0 and N/C
Antenna Impedance 50 Ohms Quarter Wave Antenna optional
Dimensions: 24.13 x 19.05 x 8.89 cm / 9.5  x 7.5 x 3.5 inch
Weight 8 lb. (4 Kg) each
Enclosure  Receiver NEMA 3R  metallic waterproof
Operation: output selection
  
 

 Optional Accessories

931230  Din Power Supply 
Output: 12VDC, 2 Amp.
Input:    100-240VAC

12VDC  Power Supply   $69.99 

Warning: Radio control equipment is not to be used in life safety
Power Adapter 12V Time Clock Mechanical Float Switch

DISCLAIMER:  Electrodepot does not provide installation assistance, Contact a licensed professional for your project.