Momentary-to-Toggle
(Bi-Stable) Switching Converter (2 Wire control)
The LATCH module is an auxiliary device designed to allow easy
and reliable arming/disarming momentary, two wire start stop
circuit, or with hand-held wireless remote controls. It may be
looked upon as an easy-to-use, cost-effective
"momentary-to-toggle (bi-stable)" switching converter.
(No polarity reverse needed) Note: The LATCH module is also suitable for remote control
operations, ON & OFF with only one channel.
The relay provides dry N.O. and N.C. contacts, and can be
used with a wide variety of control applications.
Specifications and
Features
The
LATCH relay provides N.O. and N.C. outputs.
Operating power - 12 VDC
Current drain - less than 1mA (unlatched), 60 mA (latched).
Relays switching 5A / 125VAC.
Auto reset by power removal
Octal DIN mount 8 pin base included
MADE IN USA
5 and
6 External contact input
(2 Wire control)
Momentary external closure of the terminals
5 and 6 will latch the
relay.
A subsequent momentary closure will unlatch the relay
or
reset the relay by removing power from terminal 2 or 7.
8
Pin base included
1 Channel
Transmitter
