Automation and process control

Heavy-Duty Industrial Timer

Twin Setting Repeat Cycle Timer Example
features two timers as a continuously functioning repeat cycle timer.

When power is applied to the timer coil, the lead timer immediately begins its time delay. Once the lead timer's delay is reached, the relay contacts transfer and remain transferred until the lag timer's delay setting is reached. The relay contacts are released, both timers are reset and the timing cycle automatically begins. Both the lead and the lag timer can be set at any point from zero to full scale by adjusting the twin timers. Any pattern of relay contacts "ON" and "OFF" can be achieved. ( Octal base included )

Timer 12 or 24 VDC   0.1 Sec. to 300 hr
Functions: ON-Delay, Repeat cycle (on-start, off-start), Signal ON/OFF delay, Signal OFF-delay,

Timer Form : Analog Timer 1/16 DIN IP54,
48x48 mm

Contact Current, Ratings : 5 A @ 250 VAC DPDT

Mounting Type : Panel, Surface, DIN   8 pin base

Power Rating : 1.3 W

Led Status indicator : Time status and power supply

Temperature, Operating, : Maximum 55 °C
Minimum -10 °C

Timer Type : Solid State

Timing Function : 5 Selectable Multi-Function

Timing Mode : ON-Delay

Timing Range : 0.1 Sec. to 300 hr

Voltage, Input : 12, 24VDC
Optional 24 VDC Power

934183

TWO timers w base

DISCLAIMER The applications shown here are referential examples only, and are not intended for actual constructions plans. Contact a licensed professional. AM Products assumes no responsibility nor provides consulting of the use of this drawings

Top

Warranty - Contact -