Electrodepot


.

 Pre-programmed Wireless control Kit  SPECIAL ORDER 9004

  OPERATION:
Pre programmer panel for a three float circuit application,
On contact closure (Low) sends a pulse to start the pump
On contact closure (High) sends a pulse to stop the pump
With (Overflow ) second  stop signal is transmitted to end the operation
 
Wiring diagram example   

 PERFORMANCE

5 Miles ( 8 km ) line of sight, 
2000 feet (600m) inside partially obstructed
Optional extended range 20 Miles ( 32 km ) line of sight


  Aluminum Die Cast Hinged Weatherproof Enclosure
  U-Bolt Pole Mounting Hardware specification: IP67

Special order include:
1  Transmitter set  937144
1  Receiver set  937044
2  Antennas,
21"
2  NEMA 3X   enclosure
2  Power adapters 12VDC

1  Wiring Diagram

    ED9004      $1,899.99 Special Order

  SPECIFICATIONS 
Voltage: 12 to 15. VDC
Temperature: -4° to +140° F (-20° to +60° C)
Transmission  Digital 16Bit encoded FM
Frequency  27,255 MHz  industrial
 Codes:  65,536 DIP switch programming
Current Drain Receiver  25 mA, standby, 195 mA operation
Transmitter 1 mA standby, 2 Amp, 2 sec.
Data process  Encoded Loop response 500 ms.
Relay Output 10 Amp max 250VAC N/0 and N/C
Antenna  50 Ohms,   optional
Dimensions: 24.13 x 19.05 x 8.89 cm / 9.5 x 7.5 x 3.5 inch
Weight 6 lb. (3 Kg) each
Enclosure NEMA 3X  metallic waterproof

 Optional Accessories


Power Supply 12VDC, Solar panel Kit 12V Time Clock Mechanical Float Switch
   

DISCLAIMER: Contact a licensed professional for your project.     Warning: Radio control equipment is not to be used in life safety
® Electrodepot is a  registered trade name of AM Products Corporation - © 2011 * Special offer can be canceled at any time   SP2010