 |
|
The
2400 Personal Emergency Reporting System is
a supervised wireless emergency reporting
product designed for emergency or alert
applications. The table-top or wall-mount
Console provides pushbutton emergency assistance
to anyone who desires additional security and
peace of mind. For the visually impaired, each
button on the Console is molded with braille
characters to identify the button's function.
For seniors, children and people with special
needs
 |
|
Features
- Two-way
voice capability (with optional voice board)
- Suitable for
temporary or permanent installations
- Braille
characters for emergency, home, and clear functions
- Speaker
phone capability (with optional voice board)
- Delayed,
silent alarm feature
- Selectable
inactivity reporting: 8, 12, or 24 hours
- Selectable
two-way voice activation (with optional voice board)
- Distinct
alarm tones provided for emergency and fire alarm conditions
- Power on/off
switch
- Capacity for
up to 16 Panic Buttons and Smoke Detectors
- Installs in
minutes (power cord and Telephone connection), Anyone can do it.
- UL listed
per standard 1637
- Optional
Backup battery size: 12 volts, 1.2 Amp/hour (32 hour backup)
Specifications
-
Indicators: LED type labeled Power On, Sending, Trouble, and
Home
- Inputs: In
and out telephone jacks; connection terminals for PD-2 dialer
-
Programming
- Method:
Via RA-2400 remote access software
- Output
Tones: Distinct alarm tones provided for emergency and fire
alarm conditions; provisions for timer reset tone also
incorporated into system
- Silent
Alarm
- Feature:
Software programmable per channel
- Pulse/Tone
Dialing: Software or console programmable
- Audible
Output: Integral siren
- Operating
Temperature: 32? to 120? F (0? to 49? C)
-
Regulatory: FCC, DOC, UL 1637
-
COMMUNICATOR
- Dialing:
DTMF or pulse dialing; pulse speed (10 PPS, 60% break, 40% make)
- Ringer
Equivalence: 0.4 B
- Reporting
Formats: 4 x 2 or Ademco Contact ID
- Telephone
Numbers:
- Primary,
secondary, and supervisory
- Reports:
Full transmitter reports, console reports, general system
reports, and inactivity
-
Dimensions: 8.75 in L x 7.50 in W x 3.00 in H (222 x 190 x 76
mm)
Weight: 3 lbs. (1.36 kg)
ELECTRICAL
Primary Operating Voltage: 120 VAC, 60 Hz
Transformer: UL listed, Class II, plug-in, 16 VAC, 1.25 A
(supplied)
Back-Up Battery: Recommended battery is 12V, 1.2 amp-hour;
Linear part number 100104 (order separately)
Standby Current Drain: 80 mA without VB-4, 110 mA with VB-4
Alarm Current: 130 mA
Backup Operation: 32 hours minimum with VB-4 voice board
installed in the unit
RADIO RECEIVER
Type: Diversity, dual superheterodyne
Operating Frequency 315 MHz
Transmitter
Capacity: 16 DX or DXS devices
RF Programming
Method: Linear quick-learn
Compatible RF Formats: Linear DX, DXS
CONSOLE
Radio Zones: 16 supervised
Relay Output: Form "A" normally open common alarm contact
Contact Rating: 1 amp @ 12 VDC
Control Switches: Emergency with Braille, Home with Braille
"H", Clear with Braille "C"
Transmitters & Accessories
 |
Supervised 1-Button,
1-Channel Pendant/Wrist Transmitter
The
Model DXS-62 is a battery powered, miniature,
water-resistant, supervised transmitter designed for use in
emergency applications with the PERS-2400A. Pressing the
button on the transmitter sends a digital coded wireless
signal to the PERS-2400A unit. Supplied with pendant, velco
strap, wristband, belt clip, or pocket clip configurations.
Each transmitter is factory set to a unique code, so no
field coding is required.
To Order |
 |
Supervised 1-Button, 1-Channel Waterproof
Pendant Transmitter
The Model DXS-64 Supervised 1-Button, 1-Channel
Waterproof Pendant Transmitter is a battery
powered, miniature, waterproof, supervised
transmitter
The transmitter is supplied with a nylon pendant
necklace with a breakaway feature for added
safety. Pressing the button on the transmitter
sends a digital coded wireless signal to the
PERS-2400A. To insure sending a complete
signal, press the transmitter button for a
minimum of two seconds.
The transmitter can send a signal for up to 30
seconds per activation. The red signal indicator
on the transmitter lights when the unit is
activated.
To Order |
 |
2-Way
Audio Module with Voice Prompts
The VB-4 Audio Module is designed as an add-on
accessory for the PERS-2400A Console. The module
plugs directly into the Console's circuit board
connectors. A digitally synthesized human voice
produced by the VB-4 module announces important
system information through the Console's
speaker. The volume control adjusts the voice
level.
To Order |
 |
RJ-31X Telephone Adapter
Model Number:
RJ-ADAPT
To Order
|
 |
2
Channel Transmitter
Voice
Dialer |
|
